Subversion Repositories public

Rev

Rev 108 | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
102 luk 1
# Doxyfile 1.5.5
2
 
3
# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project
5
#
6
# All text after a hash (#) is considered a comment and will be ignored
7
# The format is:
8
#       TAG = value [value, ...]
9
# For lists items can also be appended using:
10
#       TAG += value [value, ...]
11
# Values that contain spaces should be placed between quotes (" ")
12
 
13
#---------------------------------------------------------------------------
14
# Project related configuration options
15
#---------------------------------------------------------------------------
16
 
17
# This tag specifies the encoding used for all characters in the config file
18
# that follow. The default is UTF-8 which is also the encoding used for all
19
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20
# iconv built into libc) for the transcoding. See
21
# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
 
23
DOXYFILE_ENCODING      = UTF-8
24
 
25
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26
# by quotes) that should identify the project.
27
 
28
PROJECT_NAME           = incron
29
 
30
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31
# This could be handy for archiving the generated documentation or
32
# if some version control system is used.
33
 
108 luk 34
PROJECT_NUMBER         = 0.5.10
102 luk 35
 
36
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37
# base path where the generated documentation will be put.
38
# If a relative path is entered, it will be relative to the location
39
# where doxygen was started. If left blank the current directory will be used.
40
 
41
OUTPUT_DIRECTORY       = doc
42
 
43
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44
# 4096 sub-directories (in 2 levels) under the output directory of each output
45
# format and will distribute the generated files over these directories.
46
# Enabling this option can be useful when feeding doxygen a huge amount of
47
# source files, where putting all generated files in the same directory would
48
# otherwise cause performance problems for the file system.
49
 
50
CREATE_SUBDIRS         = NO
51
 
52
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53
# documentation generated by doxygen is written. Doxygen will use this
54
# information to generate all constant output in the proper language.
55
# The default language is English, other supported languages are:
56
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57
# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
58
# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
59
# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
60
# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish,
61
# and Ukrainian.
62
 
63
OUTPUT_LANGUAGE        = English
64
 
65
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66
# include brief member descriptions after the members that are listed in
67
# the file and class documentation (similar to JavaDoc).
68
# Set to NO to disable this.
69
 
70
BRIEF_MEMBER_DESC      = YES
71
 
72
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73
# the brief description of a member or function before the detailed description.
74
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75
# brief descriptions will be completely suppressed.
76
 
77
REPEAT_BRIEF           = YES
78
 
79
# This tag implements a quasi-intelligent brief description abbreviator
80
# that is used to form the text in various listings. Each string
81
# in this list, if found as the leading text of the brief description, will be
82
# stripped from the text and the result after processing the whole list, is
83
# used as the annotated text. Otherwise, the brief description is used as-is.
84
# If left blank, the following values are used ("$name" is automatically
85
# replaced with the name of the entity): "The $name class" "The $name widget"
86
# "The $name file" "is" "provides" "specifies" "contains"
87
# "represents" "a" "an" "the"
88
 
89
ABBREVIATE_BRIEF       =
90
 
91
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92
# Doxygen will generate a detailed section even if there is only a brief
93
# description.
94
 
95
ALWAYS_DETAILED_SEC    = NO
96
 
97
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98
# inherited members of a class in the documentation of that class as if those
99
# members were ordinary class members. Constructors, destructors and assignment
100
# operators of the base classes will not be shown.
101
 
102
INLINE_INHERITED_MEMB  = NO
103
 
104
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105
# path before files name in the file list and in the header files. If set
106
# to NO the shortest path that makes the file name unique will be used.
107
 
108
FULL_PATH_NAMES        = YES
109
 
110
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111
# can be used to strip a user-defined part of the path. Stripping is
112
# only done if one of the specified strings matches the left-hand part of
113
# the path. The tag can be used to show relative paths in the file list.
114
# If left blank the directory from which doxygen is run is used as the
115
# path to strip.
116
 
117
STRIP_FROM_PATH        =
118
 
119
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120
# the path mentioned in the documentation of a class, which tells
121
# the reader which header file to include in order to use a class.
122
# If left blank only the name of the header file containing the class
123
# definition is used. Otherwise one should specify the include paths that
124
# are normally passed to the compiler using the -I flag.
125
 
126
STRIP_FROM_INC_PATH    =
127
 
128
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129
# (but less readable) file names. This can be useful is your file systems
130
# doesn't support long names like on DOS, Mac, or CD-ROM.
131
 
132
SHORT_NAMES            = NO
133
 
134
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135
# will interpret the first line (until the first dot) of a JavaDoc-style
136
# comment as the brief description. If set to NO, the JavaDoc
137
# comments will behave just like regular Qt-style comments
138
# (thus requiring an explicit @brief command for a brief description.)
139
 
140
JAVADOC_AUTOBRIEF      = NO
141
 
142
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143
# interpret the first line (until the first dot) of a Qt-style
144
# comment as the brief description. If set to NO, the comments
145
# will behave just like regular Qt-style comments (thus requiring
146
# an explicit \brief command for a brief description.)
147
 
148
QT_AUTOBRIEF           = NO
149
 
150
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151
# treat a multi-line C++ special comment block (i.e. a block of //! or ///
152
# comments) as a brief description. This used to be the default behaviour.
153
# The new default is to treat a multi-line C++ comment block as a detailed
154
# description. Set this tag to YES if you prefer the old behaviour instead.
155
 
156
MULTILINE_CPP_IS_BRIEF = NO
157
 
158
# If the DETAILS_AT_TOP tag is set to YES then Doxygen
159
# will output the detailed description near the top, like JavaDoc.
160
# If set to NO, the detailed description appears after the member
161
# documentation.
162
 
163
DETAILS_AT_TOP         = NO
164
 
165
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
166
# member inherits the documentation from any documented member that it
167
# re-implements.
168
 
169
INHERIT_DOCS           = YES
170
 
171
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
172
# a new page for each member. If set to NO, the documentation of a member will
173
# be part of the file/class/namespace that contains it.
174
 
175
SEPARATE_MEMBER_PAGES  = NO
176
 
177
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
178
# Doxygen uses this value to replace tabs by spaces in code fragments.
179
 
180
TAB_SIZE               = 2
181
 
182
# This tag can be used to specify a number of aliases that acts
183
# as commands in the documentation. An alias has the form "name=value".
184
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
185
# put the command \sideeffect (or @sideeffect) in the documentation, which
186
# will result in a user-defined paragraph with heading "Side Effects:".
187
# You can put \n's in the value part of an alias to insert newlines.
188
 
189
ALIASES                =
190
 
191
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
192
# sources only. Doxygen will then generate output that is more tailored for C.
193
# For instance, some of the names that are used will be different. The list
194
# of all members will be omitted, etc.
195
 
196
OPTIMIZE_OUTPUT_FOR_C  = NO
197
 
198
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
199
# sources only. Doxygen will then generate output that is more tailored for
200
# Java. For instance, namespaces will be presented as packages, qualified
201
# scopes will look different, etc.
202
 
203
OPTIMIZE_OUTPUT_JAVA   = NO
204
 
205
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
206
# sources only. Doxygen will then generate output that is more tailored for
207
# Fortran.
208
 
209
OPTIMIZE_FOR_FORTRAN   = NO
210
 
211
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
212
# sources. Doxygen will then generate output that is tailored for
213
# VHDL.
214
 
215
OPTIMIZE_OUTPUT_VHDL   = NO
216
 
217
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
218
# to include (a tag file for) the STL sources as input, then you should
219
# set this tag to YES in order to let doxygen match functions declarations and
220
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
221
# func(std::string) {}). This also make the inheritance and collaboration
222
# diagrams that involve STL classes more complete and accurate.
223
 
224
BUILTIN_STL_SUPPORT    = NO
225
 
226
# If you use Microsoft's C++/CLI language, you should set this option to YES to
227
# enable parsing support.
228
 
229
CPP_CLI_SUPPORT        = NO
230
 
231
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
232
# Doxygen will parse them like normal C++ but will assume all classes use public
233
# instead of private inheritance when no explicit protection keyword is present.
234
 
235
SIP_SUPPORT            = NO
236
 
237
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
238
# tag is set to YES, then doxygen will reuse the documentation of the first
239
# member in the group (if any) for the other members of the group. By default
240
# all members of a group must be documented explicitly.
241
 
242
DISTRIBUTE_GROUP_DOC   = NO
243
 
244
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
245
# the same type (for instance a group of public functions) to be put as a
246
# subgroup of that type (e.g. under the Public Functions section). Set it to
247
# NO to prevent subgrouping. Alternatively, this can be done per class using
248
# the \nosubgrouping command.
249
 
250
SUBGROUPING            = YES
251
 
252
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
253
# is documented as struct, union, or enum with the name of the typedef. So
254
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
255
# with name TypeT. When disabled the typedef will appear as a member of a file,
256
# namespace, or class. And the struct will be named TypeS. This can typically
257
# be useful for C code in case the coding convention dictates that all compound
258
# types are typedef'ed and only the typedef is referenced, never the tag name.
259
 
260
TYPEDEF_HIDES_STRUCT   = NO
261
 
262
#---------------------------------------------------------------------------
263
# Build related configuration options
264
#---------------------------------------------------------------------------
265
 
266
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
267
# documentation are documented, even if no documentation was available.
268
# Private class members and static file members will be hidden unless
269
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
270
 
271
EXTRACT_ALL            = YES
272
 
273
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
274
# will be included in the documentation.
275
 
276
EXTRACT_PRIVATE        = NO
277
 
278
# If the EXTRACT_STATIC tag is set to YES all static members of a file
279
# will be included in the documentation.
280
 
281
EXTRACT_STATIC         = YES
282
 
283
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
284
# defined locally in source files will be included in the documentation.
285
# If set to NO only classes defined in header files are included.
286
 
287
EXTRACT_LOCAL_CLASSES  = YES
288
 
289
# This flag is only useful for Objective-C code. When set to YES local
290
# methods, which are defined in the implementation section but not in
291
# the interface are included in the documentation.
292
# If set to NO (the default) only methods in the interface are included.
293
 
294
EXTRACT_LOCAL_METHODS  = NO
295
 
296
# If this flag is set to YES, the members of anonymous namespaces will be
297
# extracted and appear in the documentation as a namespace called
298
# 'anonymous_namespace{file}', where file will be replaced with the base
299
# name of the file that contains the anonymous namespace. By default
300
# anonymous namespace are hidden.
301
 
302
EXTRACT_ANON_NSPACES   = NO
303
 
304
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
305
# undocumented members of documented classes, files or namespaces.
306
# If set to NO (the default) these members will be included in the
307
# various overviews, but no documentation section is generated.
308
# This option has no effect if EXTRACT_ALL is enabled.
309
 
310
HIDE_UNDOC_MEMBERS     = NO
311
 
312
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
313
# undocumented classes that are normally visible in the class hierarchy.
314
# If set to NO (the default) these classes will be included in the various
315
# overviews. This option has no effect if EXTRACT_ALL is enabled.
316
 
317
HIDE_UNDOC_CLASSES     = NO
318
 
319
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
320
# friend (class|struct|union) declarations.
321
# If set to NO (the default) these declarations will be included in the
322
# documentation.
323
 
324
HIDE_FRIEND_COMPOUNDS  = NO
325
 
326
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
327
# documentation blocks found inside the body of a function.
328
# If set to NO (the default) these blocks will be appended to the
329
# function's detailed documentation block.
330
 
331
HIDE_IN_BODY_DOCS      = NO
332
 
333
# The INTERNAL_DOCS tag determines if documentation
334
# that is typed after a \internal command is included. If the tag is set
335
# to NO (the default) then the documentation will be excluded.
336
# Set it to YES to include the internal documentation.
337
 
338
INTERNAL_DOCS          = NO
339
 
340
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
341
# file names in lower-case letters. If set to YES upper-case letters are also
342
# allowed. This is useful if you have classes or files whose names only differ
343
# in case and if your file system supports case sensitive file names. Windows
344
# and Mac users are advised to set this option to NO.
345
 
346
CASE_SENSE_NAMES       = YES
347
 
348
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
349
# will show members with their full class and namespace scopes in the
350
# documentation. If set to YES the scope will be hidden.
351
 
352
HIDE_SCOPE_NAMES       = NO
353
 
354
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
355
# will put a list of the files that are included by a file in the documentation
356
# of that file.
357
 
358
SHOW_INCLUDE_FILES     = YES
359
 
360
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
361
# is inserted in the documentation for inline members.
362
 
363
INLINE_INFO            = YES
364
 
365
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
366
# will sort the (detailed) documentation of file and class members
367
# alphabetically by member name. If set to NO the members will appear in
368
# declaration order.
369
 
370
SORT_MEMBER_DOCS       = YES
371
 
372
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
373
# brief documentation of file, namespace and class members alphabetically
374
# by member name. If set to NO (the default) the members will appear in
375
# declaration order.
376
 
377
SORT_BRIEF_DOCS        = NO
378
 
379
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
380
# hierarchy of group names into alphabetical order. If set to NO (the default)
381
# the group names will appear in their defined order.
382
 
383
SORT_GROUP_NAMES       = NO
384
 
385
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
386
# sorted by fully-qualified names, including namespaces. If set to
387
# NO (the default), the class list will be sorted only by class name,
388
# not including the namespace part.
389
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
390
# Note: This option applies only to the class list, not to the
391
# alphabetical list.
392
 
393
SORT_BY_SCOPE_NAME     = NO
394
 
395
# The GENERATE_TODOLIST tag can be used to enable (YES) or
396
# disable (NO) the todo list. This list is created by putting \todo
397
# commands in the documentation.
398
 
399
GENERATE_TODOLIST      = YES
400
 
401
# The GENERATE_TESTLIST tag can be used to enable (YES) or
402
# disable (NO) the test list. This list is created by putting \test
403
# commands in the documentation.
404
 
405
GENERATE_TESTLIST      = YES
406
 
407
# The GENERATE_BUGLIST tag can be used to enable (YES) or
408
# disable (NO) the bug list. This list is created by putting \bug
409
# commands in the documentation.
410
 
411
GENERATE_BUGLIST       = YES
412
 
413
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
414
# disable (NO) the deprecated list. This list is created by putting
415
# \deprecated commands in the documentation.
416
 
417
GENERATE_DEPRECATEDLIST= YES
418
 
419
# The ENABLED_SECTIONS tag can be used to enable conditional
420
# documentation sections, marked by \if sectionname ... \endif.
421
 
422
ENABLED_SECTIONS       =
423
 
424
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
425
# the initial value of a variable or define consists of for it to appear in
426
# the documentation. If the initializer consists of more lines than specified
427
# here it will be hidden. Use a value of 0 to hide initializers completely.
428
# The appearance of the initializer of individual variables and defines in the
429
# documentation can be controlled using \showinitializer or \hideinitializer
430
# command in the documentation regardless of this setting.
431
 
432
MAX_INITIALIZER_LINES  = 30
433
 
434
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
435
# at the bottom of the documentation of classes and structs. If set to YES the
436
# list will mention the files that were used to generate the documentation.
437
 
438
SHOW_USED_FILES        = YES
439
 
440
# If the sources in your project are distributed over multiple directories
441
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
442
# in the documentation. The default is NO.
443
 
444
SHOW_DIRECTORIES       = NO
445
 
446
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
447
# doxygen should invoke to get the current version for each file (typically from
448
# the version control system). Doxygen will invoke the program by executing (via
449
# popen()) the command <command> <input-file>, where <command> is the value of
450
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
451
# provided by doxygen. Whatever the program writes to standard output
452
# is used as the file version. See the manual for examples.
453
 
454
FILE_VERSION_FILTER    =
455
 
456
#---------------------------------------------------------------------------
457
# configuration options related to warning and progress messages
458
#---------------------------------------------------------------------------
459
 
460
# The QUIET tag can be used to turn on/off the messages that are generated
461
# by doxygen. Possible values are YES and NO. If left blank NO is used.
462
 
463
QUIET                  = NO
464
 
465
# The WARNINGS tag can be used to turn on/off the warning messages that are
466
# generated by doxygen. Possible values are YES and NO. If left blank
467
# NO is used.
468
 
469
WARNINGS               = YES
470
 
471
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
472
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
473
# automatically be disabled.
474
 
475
WARN_IF_UNDOCUMENTED   = YES
476
 
477
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
478
# potential errors in the documentation, such as not documenting some
479
# parameters in a documented function, or documenting parameters that
480
# don't exist or using markup commands wrongly.
481
 
482
WARN_IF_DOC_ERROR      = YES
483
 
484
# This WARN_NO_PARAMDOC option can be abled to get warnings for
485
# functions that are documented, but have no documentation for their parameters
486
# or return value. If set to NO (the default) doxygen will only warn about
487
# wrong or incomplete parameter documentation, but not about the absence of
488
# documentation.
489
 
490
WARN_NO_PARAMDOC       = NO
491
 
492
# The WARN_FORMAT tag determines the format of the warning messages that
493
# doxygen can produce. The string should contain the $file, $line, and $text
494
# tags, which will be replaced by the file and line number from which the
495
# warning originated and the warning text. Optionally the format may contain
496
# $version, which will be replaced by the version of the file (if it could
497
# be obtained via FILE_VERSION_FILTER)
498
 
499
WARN_FORMAT            = "$file:$line: $text"
500
 
501
# The WARN_LOGFILE tag can be used to specify a file to which warning
502
# and error messages should be written. If left blank the output is written
503
# to stderr.
504
 
505
WARN_LOGFILE           =
506
 
507
#---------------------------------------------------------------------------
508
# configuration options related to the input files
509
#---------------------------------------------------------------------------
510
 
511
# The INPUT tag can be used to specify the files and/or directories that contain
512
# documented source files. You may enter file names like "myfile.cpp" or
513
# directories like "/usr/src/myproject". Separate the files or directories
514
# with spaces.
515
 
516
INPUT                  =
517
 
518
# This tag can be used to specify the character encoding of the source files
519
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
520
# also the default input encoding. Doxygen uses libiconv (or the iconv built
521
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
522
# the list of possible encodings.
523
 
524
INPUT_ENCODING         = UTF-8
525
 
526
# If the value of the INPUT tag contains directories, you can use the
527
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
528
# and *.h) to filter out the source-files in the directories. If left
529
# blank the following patterns are tested:
530
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
531
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
532
 
533
FILE_PATTERNS          =
534
 
535
# The RECURSIVE tag can be used to turn specify whether or not subdirectories
536
# should be searched for input files as well. Possible values are YES and NO.
537
# If left blank NO is used.
538
 
539
RECURSIVE              = NO
540
 
541
# The EXCLUDE tag can be used to specify files and/or directories that should
542
# excluded from the INPUT source files. This way you can easily exclude a
543
# subdirectory from a directory tree whose root is specified with the INPUT tag.
544
 
545
EXCLUDE                =
546
 
547
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
548
# directories that are symbolic links (a Unix filesystem feature) are excluded
549
# from the input.
550
 
551
EXCLUDE_SYMLINKS       = NO
552
 
553
# If the value of the INPUT tag contains directories, you can use the
554
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
555
# certain files from those directories. Note that the wildcards are matched
556
# against the file with absolute path, so to exclude all test directories
557
# for example use the pattern */test/*
558
 
559
EXCLUDE_PATTERNS       =
560
 
561
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
562
# (namespaces, classes, functions, etc.) that should be excluded from the
563
# output. The symbol name can be a fully qualified name, a word, or if the
564
# wildcard * is used, a substring. Examples: ANamespace, AClass,
565
# AClass::ANamespace, ANamespace::*Test
566
 
567
EXCLUDE_SYMBOLS        =
568
 
569
# The EXAMPLE_PATH tag can be used to specify one or more files or
570
# directories that contain example code fragments that are included (see
571
# the \include command).
572
 
573
EXAMPLE_PATH           =
574
 
575
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
576
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
577
# and *.h) to filter out the source-files in the directories. If left
578
# blank all files are included.
579
 
580
EXAMPLE_PATTERNS       =
581
 
582
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
583
# searched for input files to be used with the \include or \dontinclude
584
# commands irrespective of the value of the RECURSIVE tag.
585
# Possible values are YES and NO. If left blank NO is used.
586
 
587
EXAMPLE_RECURSIVE      = NO
588
 
589
# The IMAGE_PATH tag can be used to specify one or more files or
590
# directories that contain image that are included in the documentation (see
591
# the \image command).
592
 
593
IMAGE_PATH             =
594
 
595
# The INPUT_FILTER tag can be used to specify a program that doxygen should
596
# invoke to filter for each input file. Doxygen will invoke the filter program
597
# by executing (via popen()) the command <filter> <input-file>, where <filter>
598
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
599
# input file. Doxygen will then use the output that the filter program writes
600
# to standard output.  If FILTER_PATTERNS is specified, this tag will be
601
# ignored.
602
 
603
INPUT_FILTER           =
604
 
605
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
606
# basis.  Doxygen will compare the file name with each pattern and apply the
607
# filter if there is a match.  The filters are a list of the form:
608
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
609
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
610
# is applied to all files.
611
 
612
FILTER_PATTERNS        =
613
 
614
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
615
# INPUT_FILTER) will be used to filter the input files when producing source
616
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
617
 
618
FILTER_SOURCE_FILES    = NO
619
 
620
#---------------------------------------------------------------------------
621
# configuration options related to source browsing
622
#---------------------------------------------------------------------------
623
 
624
# If the SOURCE_BROWSER tag is set to YES then a list of source files will
625
# be generated. Documented entities will be cross-referenced with these sources.
626
# Note: To get rid of all source code in the generated output, make sure also
627
# VERBATIM_HEADERS is set to NO.
628
 
629
SOURCE_BROWSER         = NO
630
 
631
# Setting the INLINE_SOURCES tag to YES will include the body
632
# of functions and classes directly in the documentation.
633
 
634
INLINE_SOURCES         = NO
635
 
636
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
637
# doxygen to hide any special comment blocks from generated source code
638
# fragments. Normal C and C++ comments will always remain visible.
639
 
640
STRIP_CODE_COMMENTS    = YES
641
 
642
# If the REFERENCED_BY_RELATION tag is set to YES (the default)
643
# then for each documented function all documented
644
# functions referencing it will be listed.
645
 
646
REFERENCED_BY_RELATION = NO
647
 
648
# If the REFERENCES_RELATION tag is set to YES (the default)
649
# then for each documented function all documented entities
650
# called/used by that function will be listed.
651
 
652
REFERENCES_RELATION    = NO
653
 
654
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
655
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
656
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
657
# link to the source code.  Otherwise they will link to the documentstion.
658
 
659
REFERENCES_LINK_SOURCE = YES
660
 
661
# If the USE_HTAGS tag is set to YES then the references to source code
662
# will point to the HTML generated by the htags(1) tool instead of doxygen
663
# built-in source browser. The htags tool is part of GNU's global source
664
# tagging system (see http://www.gnu.org/software/global/global.html). You
665
# will need version 4.8.6 or higher.
666
 
667
USE_HTAGS              = NO
668
 
669
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
670
# will generate a verbatim copy of the header file for each class for
671
# which an include is specified. Set to NO to disable this.
672
 
673
VERBATIM_HEADERS       = YES
674
 
675
#---------------------------------------------------------------------------
676
# configuration options related to the alphabetical class index
677
#---------------------------------------------------------------------------
678
 
679
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
680
# of all compounds will be generated. Enable this if the project
681
# contains a lot of classes, structs, unions or interfaces.
682
 
683
ALPHABETICAL_INDEX     = NO
684
 
685
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
686
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
687
# in which this list will be split (can be a number in the range [1..20])
688
 
689
COLS_IN_ALPHA_INDEX    = 5
690
 
691
# In case all classes in a project start with a common prefix, all
692
# classes will be put under the same header in the alphabetical index.
693
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
694
# should be ignored while generating the index headers.
695
 
696
IGNORE_PREFIX          =
697
 
698
#---------------------------------------------------------------------------
699
# configuration options related to the HTML output
700
#---------------------------------------------------------------------------
701
 
702
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
703
# generate HTML output.
704
 
705
GENERATE_HTML          = YES
706
 
707
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
708
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
709
# put in front of it. If left blank `html' will be used as the default path.
710
 
711
HTML_OUTPUT            = html
712
 
713
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
714
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
715
# doxygen will generate files with .html extension.
716
 
717
HTML_FILE_EXTENSION    = .html
718
 
719
# The HTML_HEADER tag can be used to specify a personal HTML header for
720
# each generated HTML page. If it is left blank doxygen will generate a
721
# standard header.
722
 
723
HTML_HEADER            =
724
 
725
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
726
# each generated HTML page. If it is left blank doxygen will generate a
727
# standard footer.
728
 
729
HTML_FOOTER            =
730
 
731
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
732
# style sheet that is used by each HTML page. It can be used to
733
# fine-tune the look of the HTML output. If the tag is left blank doxygen
734
# will generate a default style sheet. Note that doxygen will try to copy
735
# the style sheet file to the HTML output directory, so don't put your own
736
# stylesheet in the HTML output directory as well, or it will be erased!
737
 
738
HTML_STYLESHEET        =
739
 
740
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
741
# files or namespaces will be aligned in HTML using tables. If set to
742
# NO a bullet list will be used.
743
 
744
HTML_ALIGN_MEMBERS     = YES
745
 
746
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
747
# will be generated that can be used as input for tools like the
748
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
749
# of the generated HTML documentation.
750
 
751
GENERATE_HTMLHELP      = NO
752
 
753
# If the GENERATE_DOCSET tag is set to YES, additional index files
754
# will be generated that can be used as input for Apple's Xcode 3
755
# integrated development environment, introduced with OSX 10.5 (Leopard).
756
# To create a documentation set, doxygen will generate a Makefile in the
757
# HTML output directory. Running make will produce the docset in that
758
# directory and running "make install" will install the docset in
759
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
760
# it at startup.
761
 
762
GENERATE_DOCSET        = NO
763
 
764
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
765
# feed. A documentation feed provides an umbrella under which multiple
766
# documentation sets from a single provider (such as a company or product suite)
767
# can be grouped.
768
 
769
DOCSET_FEEDNAME        = "Doxygen generated docs"
770
 
771
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
772
# should uniquely identify the documentation set bundle. This should be a
773
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
774
# will append .docset to the name.
775
 
776
DOCSET_BUNDLE_ID       = org.doxygen.Project
777
 
778
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
779
# documentation will contain sections that can be hidden and shown after the
780
# page has loaded. For this to work a browser that supports
781
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
782
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
783
 
784
HTML_DYNAMIC_SECTIONS  = NO
785
 
786
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
787
# be used to specify the file name of the resulting .chm file. You
788
# can add a path in front of the file if the result should not be
789
# written to the html output directory.
790
 
791
CHM_FILE               =
792
 
793
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
794
# be used to specify the location (absolute path including file name) of
795
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
796
# the HTML help compiler on the generated index.hhp.
797
 
798
HHC_LOCATION           =
799
 
800
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
801
# controls if a separate .chi index file is generated (YES) or that
802
# it should be included in the master .chm file (NO).
803
 
804
GENERATE_CHI           = NO
805
 
806
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
807
# controls whether a binary table of contents is generated (YES) or a
808
# normal table of contents (NO) in the .chm file.
809
 
810
BINARY_TOC             = NO
811
 
812
# The TOC_EXPAND flag can be set to YES to add extra items for group members
813
# to the contents of the HTML help documentation and to the tree view.
814
 
815
TOC_EXPAND             = NO
816
 
817
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
818
# top of each HTML page. The value NO (the default) enables the index and
819
# the value YES disables it.
820
 
821
DISABLE_INDEX          = NO
822
 
823
# This tag can be used to set the number of enum values (range [1..20])
824
# that doxygen will group on one line in the generated HTML documentation.
825
 
826
ENUM_VALUES_PER_LINE   = 4
827
 
828
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
829
# generated containing a tree-like index structure (just like the one that
830
# is generated for HTML Help). For this to work a browser that supports
831
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
832
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
833
# probably better off using the HTML help feature.
834
 
835
GENERATE_TREEVIEW      = NO
836
 
837
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
838
# used to set the initial width (in pixels) of the frame in which the tree
839
# is shown.
840
 
841
TREEVIEW_WIDTH         = 250
842
 
843
#---------------------------------------------------------------------------
844
# configuration options related to the LaTeX output
845
#---------------------------------------------------------------------------
846
 
847
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
848
# generate Latex output.
849
 
850
GENERATE_LATEX         = NO
851
 
852
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
853
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
854
# put in front of it. If left blank `latex' will be used as the default path.
855
 
856
LATEX_OUTPUT           = latex
857
 
858
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
859
# invoked. If left blank `latex' will be used as the default command name.
860
 
861
LATEX_CMD_NAME         = latex
862
 
863
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
864
# generate index for LaTeX. If left blank `makeindex' will be used as the
865
# default command name.
866
 
867
MAKEINDEX_CMD_NAME     = makeindex
868
 
869
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
870
# LaTeX documents. This may be useful for small projects and may help to
871
# save some trees in general.
872
 
873
COMPACT_LATEX          = NO
874
 
875
# The PAPER_TYPE tag can be used to set the paper type that is used
876
# by the printer. Possible values are: a4, a4wide, letter, legal and
877
# executive. If left blank a4wide will be used.
878
 
879
PAPER_TYPE             = a4wide
880
 
881
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
882
# packages that should be included in the LaTeX output.
883
 
884
EXTRA_PACKAGES         =
885
 
886
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
887
# the generated latex document. The header should contain everything until
888
# the first chapter. If it is left blank doxygen will generate a
889
# standard header. Notice: only use this tag if you know what you are doing!
890
 
891
LATEX_HEADER           =
892
 
893
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
894
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
895
# contain links (just like the HTML output) instead of page references
896
# This makes the output suitable for online browsing using a pdf viewer.
897
 
898
PDF_HYPERLINKS         = YES
899
 
900
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
901
# plain latex in the generated Makefile. Set this option to YES to get a
902
# higher quality PDF documentation.
903
 
904
USE_PDFLATEX           = YES
905
 
906
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
907
# command to the generated LaTeX files. This will instruct LaTeX to keep
908
# running if errors occur, instead of asking the user for help.
909
# This option is also used when generating formulas in HTML.
910
 
911
LATEX_BATCHMODE        = NO
912
 
913
# If LATEX_HIDE_INDICES is set to YES then doxygen will not
914
# include the index chapters (such as File Index, Compound Index, etc.)
915
# in the output.
916
 
917
LATEX_HIDE_INDICES     = NO
918
 
919
#---------------------------------------------------------------------------
920
# configuration options related to the RTF output
921
#---------------------------------------------------------------------------
922
 
923
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
924
# The RTF output is optimized for Word 97 and may not look very pretty with
925
# other RTF readers or editors.
926
 
927
GENERATE_RTF           = NO
928
 
929
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
930
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
931
# put in front of it. If left blank `rtf' will be used as the default path.
932
 
933
RTF_OUTPUT             = rtf
934
 
935
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
936
# RTF documents. This may be useful for small projects and may help to
937
# save some trees in general.
938
 
939
COMPACT_RTF            = NO
940
 
941
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
942
# will contain hyperlink fields. The RTF file will
943
# contain links (just like the HTML output) instead of page references.
944
# This makes the output suitable for online browsing using WORD or other
945
# programs which support those fields.
946
# Note: wordpad (write) and others do not support links.
947
 
948
RTF_HYPERLINKS         = NO
949
 
950
# Load stylesheet definitions from file. Syntax is similar to doxygen's
951
# config file, i.e. a series of assignments. You only have to provide
952
# replacements, missing definitions are set to their default value.
953
 
954
RTF_STYLESHEET_FILE    =
955
 
956
# Set optional variables used in the generation of an rtf document.
957
# Syntax is similar to doxygen's config file.
958
 
959
RTF_EXTENSIONS_FILE    =
960
 
961
#---------------------------------------------------------------------------
962
# configuration options related to the man page output
963
#---------------------------------------------------------------------------
964
 
965
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
966
# generate man pages
967
 
968
GENERATE_MAN           = YES
969
 
970
# The MAN_OUTPUT tag is used to specify where the man pages will be put.
971
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
972
# put in front of it. If left blank `man' will be used as the default path.
973
 
974
MAN_OUTPUT             = man
975
 
976
# The MAN_EXTENSION tag determines the extension that is added to
977
# the generated man pages (default is the subroutine's section .3)
978
 
979
MAN_EXTENSION          = .3
980
 
981
# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
982
# then it will generate one additional man file for each entity
983
# documented in the real man page(s). These additional files
984
# only source the real man page, but without them the man command
985
# would be unable to find the correct page. The default is NO.
986
 
987
MAN_LINKS              = NO
988
 
989
#---------------------------------------------------------------------------
990
# configuration options related to the XML output
991
#---------------------------------------------------------------------------
992
 
993
# If the GENERATE_XML tag is set to YES Doxygen will
994
# generate an XML file that captures the structure of
995
# the code including all documentation.
996
 
997
GENERATE_XML           = NO
998
 
999
# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1000
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1001
# put in front of it. If left blank `xml' will be used as the default path.
1002
 
1003
XML_OUTPUT             = xml
1004
 
1005
# The XML_SCHEMA tag can be used to specify an XML schema,
1006
# which can be used by a validating XML parser to check the
1007
# syntax of the XML files.
1008
 
1009
XML_SCHEMA             =
1010
 
1011
# The XML_DTD tag can be used to specify an XML DTD,
1012
# which can be used by a validating XML parser to check the
1013
# syntax of the XML files.
1014
 
1015
XML_DTD                =
1016
 
1017
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1018
# dump the program listings (including syntax highlighting
1019
# and cross-referencing information) to the XML output. Note that
1020
# enabling this will significantly increase the size of the XML output.
1021
 
1022
XML_PROGRAMLISTING     = YES
1023
 
1024
#---------------------------------------------------------------------------
1025
# configuration options for the AutoGen Definitions output
1026
#---------------------------------------------------------------------------
1027
 
1028
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1029
# generate an AutoGen Definitions (see autogen.sf.net) file
1030
# that captures the structure of the code including all
1031
# documentation. Note that this feature is still experimental
1032
# and incomplete at the moment.
1033
 
1034
GENERATE_AUTOGEN_DEF   = NO
1035
 
1036
#---------------------------------------------------------------------------
1037
# configuration options related to the Perl module output
1038
#---------------------------------------------------------------------------
1039
 
1040
# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1041
# generate a Perl module file that captures the structure of
1042
# the code including all documentation. Note that this
1043
# feature is still experimental and incomplete at the
1044
# moment.
1045
 
1046
GENERATE_PERLMOD       = NO
1047
 
1048
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1049
# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1050
# to generate PDF and DVI output from the Perl module output.
1051
 
1052
PERLMOD_LATEX          = NO
1053
 
1054
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1055
# nicely formatted so it can be parsed by a human reader.  This is useful
1056
# if you want to understand what is going on.  On the other hand, if this
1057
# tag is set to NO the size of the Perl module output will be much smaller
1058
# and Perl will parse it just the same.
1059
 
1060
PERLMOD_PRETTY         = YES
1061
 
1062
# The names of the make variables in the generated doxyrules.make file
1063
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1064
# This is useful so different doxyrules.make files included by the same
1065
# Makefile don't overwrite each other's variables.
1066
 
1067
PERLMOD_MAKEVAR_PREFIX =
1068
 
1069
#---------------------------------------------------------------------------
1070
# Configuration options related to the preprocessor
1071
#---------------------------------------------------------------------------
1072
 
1073
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1074
# evaluate all C-preprocessor directives found in the sources and include
1075
# files.
1076
 
1077
ENABLE_PREPROCESSING   = YES
1078
 
1079
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1080
# names in the source code. If set to NO (the default) only conditional
1081
# compilation will be performed. Macro expansion can be done in a controlled
1082
# way by setting EXPAND_ONLY_PREDEF to YES.
1083
 
1084
MACRO_EXPANSION        = NO
1085
 
1086
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1087
# then the macro expansion is limited to the macros specified with the
1088
# PREDEFINED and EXPAND_AS_DEFINED tags.
1089
 
1090
EXPAND_ONLY_PREDEF     = NO
1091
 
1092
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1093
# in the INCLUDE_PATH (see below) will be search if a #include is found.
1094
 
1095
SEARCH_INCLUDES        = YES
1096
 
1097
# The INCLUDE_PATH tag can be used to specify one or more directories that
1098
# contain include files that are not input files but should be processed by
1099
# the preprocessor.
1100
 
1101
INCLUDE_PATH           =
1102
 
1103
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1104
# patterns (like *.h and *.hpp) to filter out the header-files in the
1105
# directories. If left blank, the patterns specified with FILE_PATTERNS will
1106
# be used.
1107
 
1108
INCLUDE_FILE_PATTERNS  =
1109
 
1110
# The PREDEFINED tag can be used to specify one or more macro names that
1111
# are defined before the preprocessor is started (similar to the -D option of
1112
# gcc). The argument of the tag is a list of macros of the form: name
1113
# or name=definition (no spaces). If the definition and the = are
1114
# omitted =1 is assumed. To prevent a macro definition from being
1115
# undefined via #undef or recursively expanded use the := operator
1116
# instead of the = operator.
1117
 
1118
PREDEFINED             =
1119
 
1120
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1121
# this tag can be used to specify a list of macro names that should be expanded.
1122
# The macro definition that is found in the sources will be used.
1123
# Use the PREDEFINED tag if you want to use a different macro definition.
1124
 
1125
EXPAND_AS_DEFINED      =
1126
 
1127
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1128
# doxygen's preprocessor will remove all function-like macros that are alone
1129
# on a line, have an all uppercase name, and do not end with a semicolon. Such
1130
# function macros are typically used for boiler-plate code, and will confuse
1131
# the parser if not removed.
1132
 
1133
SKIP_FUNCTION_MACROS   = YES
1134
 
1135
#---------------------------------------------------------------------------
1136
# Configuration::additions related to external references
1137
#---------------------------------------------------------------------------
1138
 
1139
# The TAGFILES option can be used to specify one or more tagfiles.
1140
# Optionally an initial location of the external documentation
1141
# can be added for each tagfile. The format of a tag file without
1142
# this location is as follows:
1143
#   TAGFILES = file1 file2 ...
1144
# Adding location for the tag files is done as follows:
1145
#   TAGFILES = file1=loc1 "file2 = loc2" ...
1146
# where "loc1" and "loc2" can be relative or absolute paths or
1147
# URLs. If a location is present for each tag, the installdox tool
1148
# does not have to be run to correct the links.
1149
# Note that each tag file must have a unique name
1150
# (where the name does NOT include the path)
1151
# If a tag file is not located in the directory in which doxygen
1152
# is run, you must also specify the path to the tagfile here.
1153
 
1154
TAGFILES               =
1155
 
1156
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1157
# a tag file that is based on the input files it reads.
1158
 
1159
GENERATE_TAGFILE       =
1160
 
1161
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1162
# in the class index. If set to NO only the inherited external classes
1163
# will be listed.
1164
 
1165
ALLEXTERNALS           = NO
1166
 
1167
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1168
# in the modules index. If set to NO, only the current project's groups will
1169
# be listed.
1170
 
1171
EXTERNAL_GROUPS        = YES
1172
 
1173
# The PERL_PATH should be the absolute path and name of the perl script
1174
# interpreter (i.e. the result of `which perl').
1175
 
1176
PERL_PATH              = /usr/bin/perl
1177
 
1178
#---------------------------------------------------------------------------
1179
# Configuration options related to the dot tool
1180
#---------------------------------------------------------------------------
1181
 
1182
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1183
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1184
# or super classes. Setting the tag to NO turns the diagrams off. Note that
1185
# this option is superseded by the HAVE_DOT option below. This is only a
1186
# fallback. It is recommended to install and use dot, since it yields more
1187
# powerful graphs.
1188
 
1189
CLASS_DIAGRAMS         = YES
1190
 
1191
# You can define message sequence charts within doxygen comments using the \msc
1192
# command. Doxygen will then run the mscgen tool (see
1193
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1194
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1195
# the mscgen tool resides. If left empty the tool is assumed to be found in the
1196
# default search path.
1197
 
1198
MSCGEN_PATH            =
1199
 
1200
# If set to YES, the inheritance and collaboration graphs will hide
1201
# inheritance and usage relations if the target is undocumented
1202
# or is not a class.
1203
 
1204
HIDE_UNDOC_RELATIONS   = YES
1205
 
1206
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1207
# available from the path. This tool is part of Graphviz, a graph visualization
1208
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1209
# have no effect if this option is set to NO (the default)
1210
 
1211
HAVE_DOT               = NO
1212
 
1213
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1214
# will generate a graph for each documented class showing the direct and
1215
# indirect inheritance relations. Setting this tag to YES will force the
1216
# the CLASS_DIAGRAMS tag to NO.
1217
 
1218
CLASS_GRAPH            = YES
1219
 
1220
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1221
# will generate a graph for each documented class showing the direct and
1222
# indirect implementation dependencies (inheritance, containment, and
1223
# class references variables) of the class with other documented classes.
1224
 
1225
COLLABORATION_GRAPH    = YES
1226
 
1227
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1228
# will generate a graph for groups, showing the direct groups dependencies
1229
 
1230
GROUP_GRAPHS           = YES
1231
 
1232
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1233
# collaboration diagrams in a style similar to the OMG's Unified Modeling
1234
# Language.
1235
 
1236
UML_LOOK               = NO
1237
 
1238
# If set to YES, the inheritance and collaboration graphs will show the
1239
# relations between templates and their instances.
1240
 
1241
TEMPLATE_RELATIONS     = NO
1242
 
1243
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1244
# tags are set to YES then doxygen will generate a graph for each documented
1245
# file showing the direct and indirect include dependencies of the file with
1246
# other documented files.
1247
 
1248
INCLUDE_GRAPH          = YES
1249
 
1250
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1251
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1252
# documented header file showing the documented files that directly or
1253
# indirectly include this file.
1254
 
1255
INCLUDED_BY_GRAPH      = YES
1256
 
1257
# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1258
# doxygen will generate a call dependency graph for every global function
1259
# or class method. Note that enabling this option will significantly increase
1260
# the time of a run. So in most cases it will be better to enable call graphs
1261
# for selected functions only using the \callgraph command.
1262
 
1263
CALL_GRAPH             = NO
1264
 
1265
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1266
# doxygen will generate a caller dependency graph for every global function
1267
# or class method. Note that enabling this option will significantly increase
1268
# the time of a run. So in most cases it will be better to enable caller
1269
# graphs for selected functions only using the \callergraph command.
1270
 
1271
CALLER_GRAPH           = NO
1272
 
1273
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1274
# will graphical hierarchy of all classes instead of a textual one.
1275
 
1276
GRAPHICAL_HIERARCHY    = YES
1277
 
1278
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1279
# then doxygen will show the dependencies a directory has on other directories
1280
# in a graphical way. The dependency relations are determined by the #include
1281
# relations between the files in the directories.
1282
 
1283
DIRECTORY_GRAPH        = YES
1284
 
1285
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1286
# generated by dot. Possible values are png, jpg, or gif
1287
# If left blank png will be used.
1288
 
1289
DOT_IMAGE_FORMAT       = png
1290
 
1291
# The tag DOT_PATH can be used to specify the path where the dot tool can be
1292
# found. If left blank, it is assumed the dot tool can be found in the path.
1293
 
1294
DOT_PATH               =
1295
 
1296
# The DOTFILE_DIRS tag can be used to specify one or more directories that
1297
# contain dot files that are included in the documentation (see the
1298
# \dotfile command).
1299
 
1300
DOTFILE_DIRS           =
1301
 
1302
# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1303
# nodes that will be shown in the graph. If the number of nodes in a graph
1304
# becomes larger than this value, doxygen will truncate the graph, which is
1305
# visualized by representing a node as a red box. Note that doxygen if the
1306
# number of direct children of the root node in a graph is already larger than
1307
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1308
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1309
 
1310
DOT_GRAPH_MAX_NODES    = 50
1311
 
1312
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1313
# graphs generated by dot. A depth value of 3 means that only nodes reachable
1314
# from the root by following a path via at most 3 edges will be shown. Nodes
1315
# that lay further from the root node will be omitted. Note that setting this
1316
# option to 1 or 2 may greatly reduce the computation time needed for large
1317
# code bases. Also note that the size of a graph can be further restricted by
1318
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1319
 
1320
MAX_DOT_GRAPH_DEPTH    = 0
1321
 
1322
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1323
# background. This is enabled by default, which results in a transparent
1324
# background. Warning: Depending on the platform used, enabling this option
1325
# may lead to badly anti-aliased labels on the edges of a graph (i.e. they
1326
# become hard to read).
1327
 
1328
DOT_TRANSPARENT        = YES
1329
 
1330
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1331
# files in one run (i.e. multiple -o and -T options on the command line). This
1332
# makes dot run faster, but since only newer versions of dot (>1.8.10)
1333
# support this, this feature is disabled by default.
1334
 
1335
DOT_MULTI_TARGETS      = NO
1336
 
1337
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1338
# generate a legend page explaining the meaning of the various boxes and
1339
# arrows in the dot generated graphs.
1340
 
1341
GENERATE_LEGEND        = YES
1342
 
1343
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1344
# remove the intermediate dot files that are used to generate
1345
# the various graphs.
1346
 
1347
DOT_CLEANUP            = YES
1348
 
1349
#---------------------------------------------------------------------------
1350
# Configuration::additions related to the search engine
1351
#---------------------------------------------------------------------------
1352
 
1353
# The SEARCHENGINE tag specifies whether or not a search engine should be
1354
# used. If set to NO the values of all tags below this one will be ignored.
1355
 
1356
SEARCHENGINE           = NO